English
Română
These types of conveyor belts were printed on the upper cover some embossed obtained by contact with a particular canvas with role of mold (canvas Aramid).
Rough top was designed for the transportation of fragile or easily deformed materials such as glass, paper bags, cardboard boxes, etc.. and can be used at angles up to 30° – 35° degrees, depending on the material to be transported, in a temperature range between -30°C … +70°C.
Slip resistant surface is ideal for application on inclined plane.
The carcass consists inserts as: polyamide/polyester (PE), polyester/polyester (EE) and polyamide/polyamide (PP).
| Dimensions | Width, mm |
800 – 1600 ± 1% |
||||||||
|
500 – 1600 ± 1% |
||||||||||
| Thickness of belt , mm |
6 – 12 |
|||||||||
| Thickness of covers, mm |
On customer’s demand |
|||||||||
| Deviation fromthickness | Belt | Under 10 mm |
± 1 mm |
|||||||
| Over 10 mm |
± 10 % |
|||||||||
| Rubber cover | Under 4 mm |
– 0,2 mm / + free |
||||||||
| Over 4 mm |
– 5 % / + free |
|||||||||
| Length, m |
On customer’s demand |
|||||||||
| Characteristics ofinsertions | Insertions number |
2 – 4 |
||||||||
| Type of insertion |
EP 80 |
EP 100 |
EP 125 |
EP 160 |
EP 200 |
EP 250 |
||||
| Tensile strength, kgf, (for 50mm*200mm) | Longitudinal | 500 | 800 | 800 | 1000 | 1200 | 1500 | |||
| Transversal | 250 | 350 | 350 | 400 | 400 | 400 | ||||
| Adhesion, kgf/cm, min | between plies |
5 |
||||||||
| between insertions and rubber covers |
4,5 |
|||||||||
| Edges |
cut edges |
|||||||||
| Special features | · Cushioning effect absorbs vibration and reduces slippage· Low friction coefficient with uncovered bottom surface· One ply or three plies of synthetic fabrics provide high strength and flexibility | |||||||||
| Breaking force of conveyor belt,(kgf/cm) | It is given by the type and number of insertions | |||||||||